- Xymon - Xymon mailman web

[PATCH] configure: error on unknown arg
by kdreyer＠usgs.gov 09 Jul '14

09 Jul '14

Prior to this commit, if a user ran configure with an unrecognized argument, the configure script would silently fail. Handle the case of unknown arguments by printing an error and exiting with a non-zero exit code. --- configure | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configure b/configure index 9173658..4b97fed 100755 --- a/configure +++ b/configure @@ -15,15 +15,22 @@ chmod 755 $BASEDIR/configure* $BASEDIR/build/*.sh $BASEDIR/client/*.sh case "$TARGET" in "--client") $BASEDIR/configure.client $* + exit 0 ;; "--server"|"") $BASEDIR/configure.server $* + exit 0 ;; "--help") echo "To configure a Xymon server: $0 --server" echo "To configure a Xymon client: $0 --client" + exit 0 + ;; + *) + echo "unrecognized $0 target $TARGET" + exit 1 ;; esac -- 1.9.0

1 2

mainframe monitoring
by Thomas.S.Sutch＠BNYMellon.com 08 Jul '14

08 Jul '14

Does anyone know if there is a client for the mainframe, or some way to monitor when a mainframe is up and the status besides a basic ping test? The information contained in this e-mail, and any attachment, is confidential and is intended solely for the use of the intended recipient. Access, copying or re-use of the e-mail or any attachment, or any information contained therein, by any other person is not authorized. If you are not the intended recipient please return the e-mail to the sender and delete it from your computer. Although we attempt to sweep e-mail and attachments for viruses, we do not guarantee that either are virus-free and accept no liability for any damage sustained as a result of viruses. Please refer to http://disclaimer.bnymellon.com/eu.htm for certain disclosures relating to European legal entities.

3 2

xymond core dumping (probably more for JC) Address out of bounds
by sean.clark＠twcable.com 08 Jul '14

08 Jul '14

JC – I installed the trunk version of xymond from terabithia – that fixed my core dump in all the deployments I had but one This one, it’s core dumping every 1-2 minutes (same OS/libraries/kernels as all the other hosts – CentOS 5.10, latest kernel) It dumps here: #6 0x0805619c in do_message (msg=0x3099c5c8, origin=0x8073d92 “", can_respond=1) at xymond.c:4025 ( response = newstrbuffer(lastboardsize); ) Here are all the symbols I could get: #6 0x0805619c in do_message (msg=0x3099c5c8, origin=0x8073d92 "", can_respond=1) at xymond.c:4025 hosthandle = <value optimized out> lwalk = <value optimized out> firstlog = <value optimized out> trendstest = {name = 0x7b <Address 0x7b out of bounds>, clientsave = 5} infotest = {name = 0x1e1000 "", clientsave = 131080} logfields = 0x3052f888 havehostfilter = 0 fields = 0x18068567 "hostname,testname" response = <value optimized out> infologrec = {host = 0x2bbe58a0, test = 0xbff1b6f0, origin = 0x0, color = 0, oldcolor = 0, activealert = 0, histsynced = 0, downtimeactive = 0, flapping = 0, oldflapcolor = 0, currflapcolor = 0, testflags = 0x0, grouplist = 0x0, sender = '\000' <repeats 15 times>, lastchange = 0x2afffbd8, logtime = 0, validtime = 0, enabletime = 0, acktime = 0, redstart = 0, yellowstart = 0, maxackedcolor = 0, message = 0x8073d92 "", msgsz = 0, dismsg = 0x0, ackmsg = 0x0, cookie = 0x0, cookieexpires = 0, metas = 0x0, modifiers = 0x0, acklist = 0xb0ada5, statuschangecount = 0, next = 0xb0ada5} rrdlogrec = {host = 0x2bbe58a0, test = 0xbff1b6f8, origin = 0x0, color = 0, oldcolor = 0, activealert = 0, histsynced = 0, downtimeactive = 0, flapping = 0, oldflapcolor = 0, currflapcolor = 0, testflags = 0x0, grouplist = 0x0, sender = '\000' <repeats 15 times>, lastchange = 0x2afffbd8, logtime = 0, validtime = 0, enabletime = 0, acktime = 0, redstart = 0, yellowstart = 0, maxackedcolor = 0, message = 0x8073d92 "", msgsz = 0, dismsg = 0x0, ackmsg = 0x0, cookie = 0x0, cookieexpires = 0, metas = 0x0, modifiers = 0x0, acklist = 0x0, statuschangecount = 0, next = 0xbff1b58c} logfilter = 0x3099c5a8 acklevel = -1 h = <value optimized out> t = <value optimized out> log = <value optimized out> color = <value optimized out> downcause = <value optimized out> sender = "10.25.9.133\000\000\000\000" grouplist = <value optimized out> now = 1404413120 timeroffset = <value optimized out> nesting = 1 lastboardsize = 25771930 lastboardsize = 0 lastboardsize = 490 #7 0x0805ac98 in main (argc=12, argv=0x3) at xymond.c:5825 seltmo = {tv_sec = 0, tv_usec = 50000} fdread = {__fds_bits = {529408, 0 <repeats 31 times>}} maxfd = <value optimized out> backfeeddata = <value optimized out> fdwrite = {__fds_bits = {0 <repeats 32 times>}} n = 0 childstat = 10534789 bfqexiting = <value optimized out> cwalk = 0x3099c5c8 now = 1404413120 connhead = 0x172d7a18 conntail = 0x3099c5c8 listenip = 0x8073eb7 "0.0.0.0" listenport = 1984 hostsfn = 0x83ad660 "!/etc/xymon/hosts.cfg" restartfn = 0x83ad5b0 "\003" logfn = 0x83ad600 "/var/log/xymon/xymond.log" checkpointinterval = 300 do_purples = 1 nextpurpleupdate = 1404413457 laddr = {sin_family = 2, sin_port = 49159, sin_addr = {s_addr = 0}, sin_zero = "\000\000\000\000\000\000\000"} lsocket = 3 opt = 1 listenq = 8192 argi = 12 tv = {tv_sec = 1404412785, tv_usec = 794754} tz = {tz_minuteswest = 240, tz_dsttime = 0} daemonize = 0 pidfile = 0x83ad560 "/var/log/xymon/xymond.pid" sa = {__sigaction_handler = {sa_handler = 0x8049c80 <sig_handler>, sa_sigaction = 0x8049c80 <sig_handler>}, sa_mask = {__val = {0 <repeats 32 times>}}, sa_flags = 0, sa_restorer = 0} conn_timeout = 30 envarea = 0x0 create_backfeedqueue = 0 nexttcpcheck = 1404413121 tcpcheckinterval = 1 Any ideas on what I should try next for this guy? -Sean ________________________________ This E-mail and any of its attachments may contain Time Warner Cable proprietary information, which is privileged, confidential, or subject to copyright belonging to Time Warner Cable. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited and may be unlawful. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout.

2 2

custom graphs
by Paul.Root＠CenturyLink.com 08 Jul '14

08 Jul '14

I decided to delete all the rrd files for this test, and after the next run (hourly). The data files are now filled out correctly. On to the graph... From: Root, Paul T Sent: Tuesday, July 08, 2014 11:20 AM To: 'xymon at xymon.com' Subject: custom graphs Hi, This is one of my least favorite things of xymon. It really shouldn't be this hard. I've had a script that pulls the %mem of certain processes on various machines. Right now, I have 3 separate groups of machines with different processes being watched. The purpose is to track memory leaks. Previously, I had the script just put out a ps -eo 'pid,%mem,cmd' for the desired processes. Then others wanted a graph, so I've reformatted the output to be just a keyword (either the process name or a significant field of the arguments of the command). I get something that looks like this now: Process Memory Usage SA: 6.5 MBIM: 2.4 OI: 4.1 Process' alert levels are defined in /usr/local/etc/procmem.cfg When levels are exceeded, restarting of the process to free memory is recommended xymProcMem,v 1.7 2014/07/07 20:37:17 ptroot Exp ptroot $ My first iteration, I used <br> to separate the lines. That was a mistake, the source of the html showed them all on one line. I've changed to \n, and that to me should provide the proper output. However, looking at the rrd dump, I only get the first one: <rrd> <version> 0003 </version> <step> 300 </step>  <lastupdate> 1404828303 </lastupdate>  <ds> <name> SA </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> NaN </min> <max> NaN </max>  <last_ds> 6.5 </last_ds> <value> NaN </value> <unknown_sec> 3 </unknown_sec> </ds> <ds> <name> xymProcMemv16201407 </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> NaN </min> <max> NaN </max>  <last_ds> 50 </last_ds> <value> NaN </value> <unknown_sec> 3 </unknown_sec> </ds> My TEST2RRD looks like: TEST2RRD="cpu=la,disk,inode,...,nfmsgw=ncv,hpnasnapshot=ncv,ProcMemory=ncv" And the NCV definitions: NCV_hpnasnapshot="TotaldevicesinDB:GAUGE,Totalactivedevicesi:GAUGE,Totalinactivedevice:GAUGE,Totaldeviceswithout:GAUGE,Pctactive:GAUGE,Pctinactive:GAUGE,Pctnodriver:GAUGE,Activeattemptedsucc:GAUGE,Activeattemptedunsu:GAUGE,Activebutnotattempt:GAUGE,PctAttemptedsuccess:GAUGE,PctAttemptedunsucce:GAUGE,PctActivebutnotatte:GAUGE" NCV_ProcMemory="SA:GAUGE,MBIM:GAUGE,OI:GAUGE,MNS1:GAUGE,NMS1:GAUGE,NMS2:GAUGE,NMS11:GAUGE,NMS12:GAUGE,NMS13:GAUGE,NMS14:GAUGE,NMS15:GAUGE,TCMgmtEngine:GAUGE,TCTFTP:GAUGE,TCSyslog:GAUGE,SWIM:GAUGE" The hpnasnapshot graph works. I've been using it as an example. Obviously, without all the data in the rrd, there is no point in trying to get a graph to show. Any ideas from anyone? Thanks, Paul. Paul Root Lead Engineer CenturyLink Network Reliability Operations Center 600 Stinson Blvd, N.E. Flr 2N Minneapolis, MN 55413 Direct: (651)312-5207 Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com>

1 0

bfq
by leo＠minas.fr 04 Jul '14

04 Jul '14

hello when I try to use bfq. Xymonnet segfault. Any clue ? oau

1 0

What do i see when i look at the memory check
by klaas.eenkhoorn＠vtspn.nl 02 Jul '14

02 Jul '14

All, What do i see when i look at the memory statistics page ? I see Physical (real), Actual and Swap, swap i know but what are the other two ? Met vriendelijke groet, Klaas D. Eenkhoorn ------------------------- Disclaimer ---------------------------- De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n) en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Kennisneming door anderen is niet toegestaan. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en binnen het bereik van een geheimhoudingsplicht en/of een verschoningsrecht vallen. Indien dit e-mailbericht niet voor u bestemd is, wordt u verzocht de afzender daarover onmiddellijk te informeren en het e-mailbericht (en bijlagen) te vernietigen. -----------------------------------------------------------------

3 2

(no subject)
by sys1002＠yahoo.com 02 Jul '14

02 Jul '14

xymon-client on xymon server sending to other xymon servers I have this working in one environment with 3 xymon servers, but just set up another 2 servers in a locked down environment. To have data sent to other xymon servers, all I had to do was change the XYMSERVERS= line in xymonclient.cfg in the /home/xymon/client/etc folder Running 4.3.11 in my normal setup, and 4.3.10 in the new one. RHEL 6 in the new setup and Centos 5 in the old one. I am not seeing anything from the either new server in ghost client report except 10.24.13.31 jsppvlscix01 1:16 , with a blank hostname , or in the defined server in hosts.cfg. ping is working between the 2 new servers. Is there anything else that needs to be done for the xymon client to work on the xymon server ? I checked my working and new tasks.cfg and they appear to be the same. I also checked that port 1984 is open on each via telnet. Any hints appreciated on how to do further testing. Thanks !

1 0

Perl ipc and bsq option
by leo＠minas.fr 02 Jul '14

02 Jul '14

hello I'm trying to use the new Posix MQ feature of the lastest Xymon version with devmon. The first step is talking to xymon with ipc in perl ... So the fisrt step will be to find the correct msqid. As I understand the C xymon code I wrote this. What is not working :( #!/usr/bin/perl -w use strict; use IPC::SysV qw(IPC_RMID ftok); # my $MAXMSG_STATUS = $ENV{'MAXMSG_STATUS'}; my $XYMONHOME = $ENV{'XYMONHOME'}; defined ($XYMONHOME) || die "getting env failed: $!"; print "HOME : $XYMONHOME\n"; defined ($MAXMSG_STATUS) || die "getting env failed: $!"; print "MAX : $MAXMSG_STATUS\n"; my $key = ftok($XYMONHOME, int($MAXMSG_STATUS)); defined ($key) || die "ftok failed: $!"; print "key $key\n"; my $id = msgget($key, 0); defined($id) || die "msgget failed: $!"; print "id $id\n"; $key and $id are not the one that ipcs -q show me ... [xymon devmon]$ perl ipc.pl HOME : /opt/xymon/server MAX : 256 key 11597 msgget failed: No such file or directory at ipc.pl line 23. [xymon devmon]$ ipcs -q ------ Message Queues -------- key msqid owner perms used-bytes messages 0x000004d2 98306 root 666 0 0 0x0a002d4d 229379 xymon 666 0 0 So even I can find the msgid with perl let force it : my $sent = "status coltmon-cf.ipcs green test"; msgsnd(229379, $sent, 0) || die "msgsnd failed: $!"; And this is working well. So if someone knows how to get the correct way to get the msgid in perl feel free to share :) oau

1 0

Alert Time
by p.jarosch＠compositiv.com 02 Jul '14

02 Jul '14

Hi all, I'm actually working on a migration from bb to xymon (xymon Package from the Debian Repository). While migrating the alerts from bb to xymon I've got the problem, that in bb it is possible to define two periods to notify (e.g. from 12 am to 6 am and from 9 pm to 11:59 pm) but I found no information if it is possible to do so in xymon as well. Is there a possibility to define two notification times or can I do it the other way round and define a time, where I get no notification ? If it is possible, how can I do that? Thanks for Help! Kind regards Pascal Jarosch -- Compositiv GmbH Süderstraße 232 20537 Hamburg Tel: 040 / 611 673 40 Fax: 040 / 611 673 41 Geschäftsführer Matthias Krawen Amtsgericht Hamburg - HRB 122540 USt.-IdNr: DE282432834 Es gelten ausschliesslich unsere AGB.

2 1

Alert Time
by thomas.eckert＠IT-Eckert.de 02 Jul '14

02 Jul '14

Moin Pascal, Am 02.07.2014 11:01 schrieb Pascal Jarosch <p.jarosch at compositiv.com>: > > Hi all, > > I'm actually working on a migration from bb to xymon (xymon Package from > the Debian Repository). > > While migrating the alerts from bb to xymon I've got the problem, that > in bb it is possible to define two periods to notify (e.g. from 12 am to > 6 am and from 9 pm to 11:59 pm) but I found no information if it is > possible to do so in xymon as well. > > Is there a possibility to define two notification times or can I do it According to the alerts.cfg manage the TIME specification is identical to the DOWNTIME in hosts.cfg which allows multiple ranges. As a side note: I would suggest to use the newest deb packages from sf.net on the server -- the pkgs from the Debian repos are fine for the clients. Cheers Thomas > the other way round and define a time, where I get no notification ? If > it is possible, how can I do that? > > Thanks for Help! > > Kind regards > Pascal Jarosch > > > -- > > Compositiv GmbH > Süderstraße 232 > 20537 Hamburg > Tel: 040 / 611 673 40 > Fax: 040 / 611 673 41 > > Geschäftsführer Matthias Krawen > Amtsgericht Hamburg - HRB 122540 > > USt.-IdNr: DE282432834 > Es gelten ausschliesslich unsere AGB. > _______________________________________________ > Xymon mailing list > Xymon at xymon.com > http://lists.xymon.com/mailman/listinfo/xymon

1 0