- Xymon - Xymon mailman web

xymon not display graphs.
by bewhite＠fellowes.com 12 Dec '11

12 Dec '11

Based on the error message, it appears you have some "garbage" (control characters?) in the comment field of your graph definition. ........Bruce From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Moodley, Nelandran N Sent: Monday, December 12, 2011 6:38 AM To: xymon at xymon.com Subject: [Xymon] xymon not display graphs. Good Day Please assist with the following error when trying to view graphs. I've installed Xymon on solaris 10. I have data collected for the server but cannot display graphs. Once I click on the following I receive the error below. Thanks in advance Nelandran Moodley | Unix Systems Engineer | Group Technology Infrastructure | Standard Bank of South Africa | 44 Borrowdale Road | RiverClub | Sandton | RSA nelandran.moodley at standardbank.co.za <mailto:Bongane.mabasa at standardbank.co.za> Office: +27 11 700 1542 Mobile: +27 82 7792059 Standard Bank email disclaimer and confidentiality note Please go to http://www.standardbank.co.za/site/homepage/emaildisclaimer.html <http://www.standardbank.co.za/site/homepage/emaildisclaimer.html> to read our email disclaimer and confidentiality note. Kindly email disclaimer at standardbank.co.za <mailto:disclaimer at standardbank.co.za> (no content or subject line necessary) if you cannot view that page and we will email our email disclaimer and confidentiality note to you. Bruce White Senior Enterprise Systems Engineer | Phone: 1-630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/ Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

1 0

Monitoring services
by Neil.Simmonds＠express-gifts.co.uk 12 Dec '11

12 Dec '11

Hi all, I've noticed that when windows services flag as red the message is a little misleading POS_4_341647 is started/automatic - want started/automatic I've checked this service and it's state is actually stopped/automatic. Is there a way to get the message to correctly reflect this? I'm running the client in central mode so I'm not sure if this is a BBWIN issue or a Xymon issue. Thanks, Neil Simmonds Operations Analyst Operations Support Group Express Gifts Ltd. neil.simmonds at express-gifts.co.uk Tel :- 01254 303092 Fax :- 01254 303100 Name & Registered Office: EXPRESS GIFTS LIMITED, 2 GREGORY ST, HYDE, CHESHIRE, ENGLAND, SK14 4TH, Company No. 00718151. Express Gifts Limited is authorised and regulated by the Financial Services Authority ------------- NOTE: This email and any information contained within or attached in a separate file is confidential and intended solely for the Individual to whom it is addressed. The information or data included is solely for the purpose indicated or previously agreed. Any information or data included with this e-mail remains the property of Findel PLC and the recipient will refrain from utilising the information for any purpose other than that indicated and upon request will destroy the information and remove it from their records. Any views or opinions presented are solely those of the author and do not necessarily represent those of Findel PLC. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. No warranties or assurances are made in relation to the safety and content of this e-mail and any attachments. No liability is accepted for any consequences arising from it. Findel Plc reserves the right to monitor all e-mail communications through its internal and external networks. If you have received this email in error please notify our IT helpdesk on +44(0) 1254 303030

2 1

Monitoring services
by malcolm.hunter＠gmx.com 12 Dec '11

12 Dec '11

Hi Neil, > ----- Original Message ----- > From: Neil Simmonds > Sent: 12/12/11 01:10 PM > To: bbwin-help at lists.sourceforge.net > Subject: [Xymon] Monitoring services > I've noticed that when windows services flag as red the message is a > little misleading > > > > POS_4_341647 is started/automatic - want started/automatic > > > > I've checked this service and it's state is actually stopped/automatic. > Is there a way to get the message to correctly reflect this? > > > > I'm running the client in central mode so I'm not sure if this is a > BBWIN issue or a Xymon issue. What's showing in the actual service listing below the status summary? Malcolm -- BBWin Development - The Windows client for Big Brother and Xymon http://bbwin.sourceforge.net http://xymon.sourceforge.net

1 0

[Feature request] Alerts should mention that the reason the colour is X is due to flapping
by spah＠syntec.co.uk 12 Dec '11

12 Dec '11

One of my colleagues queried yesterday why he got an alert when the text of the e-mail suggests the status is green and there were 0 failures in the past 10 minutes. Looking at the status now, I saw that it said: WARNING: Flapping status This must be the reason why the status colour was what it was when the alert was generated - the status was flapping. But this fact should be in the e-mail, just like it is in the display, or it just looks wrong. Alternatively, alerts should be suppressed for flapping statuses until it actually goes red (or whatever is configured in alerts.cfg) again. This would mean storing the current colour separely from the flapping-locked colour (which I expect is done anyway) and using the current colour to match the COLOR rule in alerts.cfg, and the flapping-locked colour to get the history of how long the alert has been in this colour for the purposes of matching against DURARATION and REPEAT rules. So for alert configured like this: MAIL $pg-opssms COLOR=red DURATION>10 REPEAT=30 RECOVERED that goes red for 5 minutes, yellow for 6, red for 5, yellow for 5, green for 5, yellow for 5, red for 30 minutes an alert should be genererated after 11 minutes and 41 minutes, not 10 and 40. This would mean the alert would detail the current error in the text of the alert, rather than the fact that everything is fine at that moment. Kind regards, SebA

1 0

xymon not display graphs.
by Nelandran.Moodley＠standardbank.co.za 12 Dec '11

12 Dec '11

Good Day Please assist with the following error when trying to view graphs. I've installed Xymon on solaris 10. I have data collected for the server but cannot display graphs. Once I click on the following I receive the error below. Thanks in advance [cid:image001.png at 01CCB8DB.95B2E6A0] [cid:image002.png at 01CCB8DB.95B2E6A0] Nelandran Moodley | Unix Systems Engineer | Group Technology Infrastructure | Standard Bank of South Africa | 44 Borrowdale Road | RiverClub | Sandton | RSA [cid:image003.png at 01CCB8DB.95B2E6A0] nelandran.moodley at standardbank.co.za<mailto:Bongane.mabasa at standardbank.co.za> Office: +27 11 700 1542 Mobile: +27 82 7792059 Standard Bank email disclaimer and confidentiality note Please go to http://www.standardbank.co.za/site/homepage/emaildisclaimer.html to read our email disclaimer and confidentiality note. Kindly email disclaimer at standardbank.co.za (no content or subject line necessary) if you cannot view that page and we will email our email disclaimer and confidentiality note to you.

1 0

Flapping Status
by spah＠syntec.co.uk 12 Dec '11

12 Dec '11

The most flexible option would be to specify for each hostname.test what the flapping settings should be. Wilcards and macros could be useful for things like conn flapping, but for custom tests, these ideally want their own flapping settings. I have a custom test that I would want to lock flapping colour for a maximum of 5 minutes as the test runs every minute... Kind regards, SebA _____ From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Raymond, David Sent: 20 June 2011 19:33 To: xymon at xymon.com Subject: [Xymon] Flapping Status Hi all, I don't know if you share the same idea as me, but could we add "Flapping Status" as an option in xymonserver.cfg ? We can set it as "yes or no" or other setting, or simply add a flappingstatus.cfg and add system that we want to manage. It is possible ? Keep going good work.

1 0

Problem adding GRAPHS in xymonserver.cfg
by spah＠syntec.co.uk 12 Dec '11

12 Dec '11

On the latest version of Xymon trunk, I cannot get the GRAPHS= feature in xymonserver.cfg to work as I would hope, following the instructions listed here: http://www.xymon.com/xymon/help/howtograph.html If I add disk1 so it becomes: GRAPHS="la,disk,disk1,<... lots more ...>,xymonproxy,xymond the disk1 graph does not show up on the trends page. However, I know the disk1 graph works, because I can view it by manipulating the URL generated when I click on the disk graph. And I know the xymonserver.cfg file is being read OK, because if I change disk to disk1 in the original line, the disk graph disappears altogether. What's wrong? Kind regards, SebA

2 2

error on script
by henrik＠hswn.dk 12 Dec '11

12 Dec '11

On Wed, 7 Dec 2011 12:08:54 +0400, "Sailesh" <sailesh.mohabeer at mns.intnet.mu> wrote: > I have an script for checking my database. I am getting an error but I am > unable to trouble shoot. > > /xymon/client/ext/bb-roracle.ksh[58]: (VAR0+=2),(VAR1+=2): syntax error > /xymon/client/ext/bb-roracle.ksh[58]: (VAR0+=2),(VAR1+=2): syntax error > bash-3.00# The script appears to use the Korn Shell (ksh), so you'll have to install that for it to work. From the command prompt, it seems you are running Bash. On Linux, you can usually install the "ksh" or "pdksh" packages to get a working ksh. And make sure the first line of the script points to your "ksh" binary, like #!/bin/ksh if it is installed in /bin Regards, Henrik

4 5

xymonpdf for several hosts ?
by martin.flemming＠desy.de 09 Dec '11

09 Dec '11

Hi ! Is it possible to generate the pdf's for more than one host ? http://xymonton.org/reports:xymonpdf Cheers, Martin ______________________________________________________ Martin Flemming DESY / IT office : Building 2b / 008a Notkestr. 85 phone : 040 - 8998 - 4667 22603 Hamburg mail : martin.flemming at desy.de ______________________________________________________

1 0

Monitor process on two servers - only one should have it running at one time
by vadud3＠gmail.com 09 Dec '11

09 Dec '11

I have two servers G1 and G2 where I need to monitor a process P. P should be running either on G1 or on G2. But never on both at the same time, then alert. I could simply looks for process P in section=ps of the clientlog of the both servers G1 and G2 and then alert if both comes back with the process P running, at the same time. Not sure if I should use bbcombotest for it. Suggestions? -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?

1 0