- Xymon - Xymon mailman web

Truncated email alerts
by mark.stoltzfus＠pmigroup.com 24 Aug '10

24 Aug '10

All, has anyone seen an issue where email messages that Xymon generates (NOTE: not the client status on the webpage, which is complete) are getting truncated beyond a certain length? We had already bumped up MAXMSG_STATUS and MAXMSG_CLIENT for a different issue (where the status messages going to the server were getting truncated), but this is different. For example, an alarm gets generated, and on the xymon webpage, you can see the entire status. The email we receive, however, is truncated. We're running Xymon 4.2.3 on RHEL5. We're trying to track down what layer this at, and it's proving a challenge. We're seeing this across different alarms, but they all seem to get truncated around 6kb. Regards, Mark

2 2

Xymonton down
by johan.sjoberg＠deltamanagement.se 24 Aug '10

24 Aug '10

Hi. Xymonton seems to be down at the moment. Is there someone I should contact about that? /Johan

3 2

ackcode in log file
by vadud3＠gmail.com 23 Aug '10

23 Aug '10

Does anyone know if any of the hobbit server log files contain the ackcode in it? I do not think it does by default. I could not find it in my limited query. I know SCRIPT has the ACKCODE. But I am asking if it is in any of the log file by default. If the answer is no, then what would it take to add the ackcode in notification log file ? I am guessing some code change on lib/notifylog.c 's do_notifylog function would be necessary along with some change in lib/notifylog.h. Please advise -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?

3 5

Fwd: RE: New install, no hosts shown - Never Mind
by joea＠j4computers.com 23 Aug '10

23 Aug '10

For the sake of completeness, and for those searching archives for a similar issue, I should add that - The IP address, being embedded in so many "binary" files, made it necessary to delete everything in /home/xymon/client and /home/xymon/server, for the recompile to be effective. joe a. >>> Removed dark glasses. Noted logs indicated typo in host IP. Recompiled. Working, so far, as expected. joe a. In a new install of xymon, the base web page displays, but none of the hosts listed in bb-host will show. Not even the default host. Obviously, I have something mis configured. Thanks in advance

1 0

Adding a custom RRD to graphs and monitoring
by mmoldvan＠csc.com 23 Aug '10

23 Aug '10

Ok so after that convoluted message, I ended up having much more success after hacking at it some more. If anyone is interested in the fix, or the believed answers to my questions below, let me know and I'll document my trials. Regards, Matt. Unix System Administrator Computer Science Corporation General Dynamics Land Systems 38500 Mound Rd. Sterling Heights, MI. 48310 Desk: (586) 825-8294 Oracle IM: moldvanm This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. From: Matthew Moldvan/GIS/CSC at CSC To: xymon at xymon.com Date: 08/19/2010 04:00 PM Subject: [xymon] Adding a custom RRD to graphs and monitoring All, This is stressing me out, hopefully someone takes the time to go through my ramblings below and help me out. Lots of information so please bear with me. For the past few days I've been trying to add a custom script (iostat information) and have the data graphed, but I'm not having any luck (mostly due to not understanding the RRD definitions in hobbitgraph.cfg). I've read through a ton of the how-tos on the subject, but all of them seem to vary a bit on the details. My resulting graphs look like this: http://imgur.com/4Nwrp.jpg So far I've got a script running on two systems reporting data back to the main page. This brings up my first question: When sending information to be graphed, is the data passed in as a bb status message or a bb data message? I thought I had it working at one point by sending similar data below through a status message, but I'd like to pass only a status message and HTML through the "bb status" command and keep the actual data passed for the RRD in the "bb data" command if that works. I also tried wrapping the data below in HTML comments as below, but no luck. "" Sample data: c1t50060E80104AAE50d1 : 0.82 c1t50060E80104AAE50d2 : 0.07 c1t50060E80104AAE50d3 : 1.71 c1t50060E80104AAE50d4 : 0.46 c3t50060E80104AAE52d0 : 1.31 c3t50060E80104AAE52d1 : 1.53 c3t50060E80104AAE52d2 : 0.09 c3t50060E80104AAE52d3 : 3.14 c3t50060E80104AAE52d4 : 0.61 c3t50060E80104AAE52d12 : 0.06 c0t0d0 : 11.70 c1t50060E80104AAE50d0 : 0.87 I've seen it both ways in the examples. I tried sending both, but that doesn't seem to be working. From what I understand if I specify a test as NCV in the TEST2RRD section, one of the running processes (hobbitd or hobbitrrd) will read in the "name : value" pair and pass that to an RRD update/create command? Does that require integer values or are floating point up to a certain precision acceptable? Currently I'm passing .2f from the nawk script and getting a bunch of "nans" in the RRD output (could be various reasons, though). Here go the details (NOTE: All host names and IP addresses have been scrubbed to protect the innocent): Script output: + /opt/xymon/client/bin/bb <xymon.server.ip> 'data <client.fqdn>.trends c1t50060E80104AAE50d1 : 0.82 c1t50060E80104AAE50d2 : 0.07 c1t50060E80104AAE50d3 : 1.71 c1t50060E80104AAE50d4 : 0.46 c3t50060E80104AAE52d0 : 1.31 c3t50060E80104AAE52d1 : 1.53 c3t50060E80104AAE52d2 : 0.09 c3t50060E80104AAE52d3 : 3.14 c3t50060E80104AAE52d4 : 0.61 c3t50060E80104AAE52d12 : 0.06 c0t0d0 : 11.70 c1t50060E80104AAE50d0 : 0.87 ' + /opt/xymon/client/bin/bb <xymon.server.ip> 'status <client.fqdn>.iostat green Thu Aug 19 10:47:28 EDT 2010 c1t50060E80104AAE50d1 : 0.82 c1t50060E80104AAE50d2 : 0.07 c1t50060E80104AAE50d3 : 1.71 c1t50060E80104AAE50d4 : 0.46 c3t50060E80104AAE52d0 : 1.31 c3t50060E80104AAE52d1 : 1.53 c3t50060E80104AAE52d2 : 0.09 c3t50060E80104AAE52d3 : 3.14 c3t50060E80104AAE52d4 : 0.61 c3t50060E80104AAE52d12 : 0.06 c0t0d0 : 11.70 c1t50060E80104AAE50d0 : 0.87 ' Another question: I've seen some examples sending as "bb data <client.fqdn>.trends", is that correct, or if I'm using the "bb data" command do I have to specify the test name as above? The RRD files are thus being created for every disk as such: -rw-r--r-- 1 xymon 495 19648 Aug 19 11:06 iostat,c0t0d0.rrd -rw-r--r-- 1 xymon 495 19648 Aug 18 23:22 iostat,c0t1d0.rrd -rw-r--r-- 1 xymon 495 19648 Aug 19 11:06 iostat,c1t50060E80104AAE50d0.rrd ...snip... -rw-r--r-- 1 xymon 495 19648 Aug 18 23:22 iostat,c3t50060E80104AAE52d8.rrd -rw-r--r-- 1 xymon 495 19648 Aug 18 23:22 iostat,c3t50060E80104AAE52d9.rrd An rrdtool dump <whatever>.rrd does confirm that some values are making it into the RRDs (assuming so by "last_ds" in dump output below): [root@<hostname> <fqdn.rrd.dir>]# rrdtool dump iostat,c3t50060E80104AAE52d9.rrd | more <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">  <rrd> <version>0003</version> <step>300</step>  <lastupdate>1282188121</lastupdate>  <ds> <name> lambda </name> <type> GAUGE </type> <minimal_heartbeat>0</minimal_heartbeat> <min>6.0000000000e+02</min> <max>NaN</max>  <last_ds>2.05</last_ds> <value>NaN</value> <unknown_sec> 121 </unknown_sec> </ds>  <rra> <cf>AVERAGE</cf> <pdp_per_row>1</pdp_per_row>  <params> <xff>5.0000000000e-01</xff> </params> <cdp_prep> <ds> <primary_value>NaN</primary_value> <secondary_value>0.0000000000e+00</secondary_value> <value>NaN</value> <unknown_datapoints>0</unknown_datapoints> </ds> </cdp_prep> <database>  <row><v>NaN</v></row> ...snip, all others are NaN also...  <row><v>NaN</v></row> </database> </rra> <rra> <cf>AVERAGE</cf> <pdp_per_row>6</pdp_per_row>  <params> <xff>5.0000000000e-01</xff> </params> <cdp_prep> <ds> <primary_value>0.0000000000e+00</primary_value> <secondary_value>0.0000000000e+00</secondary_value> <value>NaN</value> <unknown_datapoints>4</unknown_datapoints> </ds> </cdp_prep> <database>  <row><v>NaN</v></row> ...snip, all NaNs til the end... Relevant lines from /etc/xymon/hobbitserver.cfg: [root@<hostname> ~]# egrep 'TEST2RRD|GRAPHS' /etc/xymon/hobbitserver.cfg # TEST2RRD defines the status- and data-messages you want to collect RRD data TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,vmio=ncv, iostat=ncv ,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot" GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat:vmstat0|vmstat1|vmstat2|vmstat3|vmstat4|vmstat5|vmstat6|vmstat7|vmstat8|vmstat9, iostat ,vmio,tcp.http,tcp,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp, ncv" - (a tip from the web said "ncv" had to be in the GRAPHS portion and said "not sure why just trust me" ...) Relevant lines from /etc/xymon/hobbitgraph.cfg: [iostat] TITLE I/O Utilization - Overall FNPATTERN iostat(.*).rrd YAXIS Stats DEF:p at RRDIDX@=@RRDFN@:lambda:AVERAGE LINE1.5:p at RRDIDX@#@COLOR@:@RRDPARAM@ GPRINT:p at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n Anyone know of a link that explains some of the terminology above? I checked the rrdcreate man page, but didn't see the parts about "@RRDIDX@" and @RRDFN@" and the other stuff. p at RRDIDX@ seems to be in a lot of examples I've seen, and all my data is making it in with those variables (is that what they are?) without having multiple DEF statements. The above is generating the image I included a link to above ( http://imgur.com/4Nwrp.jpg) Thanks again to anyone that can help out ... I've been pulling my hair out about this for a few days. Regards, Matt. Unix System Administrator Computer Science Corporation This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose. This is an e-mail from General Dynamics Land Systems. It is for the intended recipient only and may contain confidential and privileged information. No one else may read, print, store, copy, forward or act in reliance on it or its attachments. If you are not the intended recipient, please return this message to the sender and delete the message and any attachments from your computer. Your cooperation is appreciated.

1 0

Fwd: bb-hosts, host names - resolved
by joea＠j4computers.com 23 Aug '10

23 Aug '10

Another never mind. Found the example bb-hosts on the demo page and got the idea. joe a.

1 0

Fwd: bb-hosts, host names
by joea＠j4computers.com 23 Aug '10

23 Aug '10

Something like that, yes. Or, just the name changed, as there seems to be a space/formatting issue looming. But, I cannot seem to get either NAME: or COMMENT: to take effect. Obviously, I have not grasped the syntax from the man page. BTW, any hints on how to get list mail sent to me would be appreciated. I had to resort to to the archives to find this. Must be in digest mode, by default. And, thanks for the prompt replies. Feel free to reply direct to me, as well, for now. joe a. >> If you're trying to get something descriptive on the display line for each host, see the COMMENT tag in the bb-hosts manpage. "Description" is the name of a field in the DESCR tag, but the contents go on the Info page, not on the main display. By default, Xymon wants to look up the host names in DNS (or at least using a resolver function), and thus they should be RFC-compliant.

1 0

Andreas Sin/CH/ITC/ALSTOM is out of the office.
by andreas.sin＠alstom.com 23 Aug '10

23 Aug '10

I will be out of the office starting 23.08.2010 and will not return until 30.08.2010. I will respond to your message when I return. I will return on Tuesday, 31st of August 2010 in the morning. During this time my deputies are Alexander Worbs, Przemyslaw Hoppe and Piotr Ostrowski. In emergency cases I'm reachable on my mobile phone +41 79 619 35 36. If I shouldn't pick up the phone, please leave me a message and I will get back to you. Best regards Andreas Sin

1 0

bb-hosts, host names
by joea＠j4computers.com 22 Aug '10

22 Aug '10

Is there a way to "escape" host name strings, in bb-hosts, to allow, say, spaces, in host names/descriptions? joe a.

3 2

New install, no hosts shown
by joea＠j4computers.com 22 Aug '10

22 Aug '10

In a new install of xymon, the base web page displays, but none of the hosts listed in bb-host will show. Not even the default host. Obviously, I have something mis configured. Thanks in advance

3 2