- Xymon - Xymon mailman web

Feature? svcs
by everett.vernon＠gmail.com 03 Aug '10

03 Aug '10

Hi all I have noticed, if you run BBWin, you get the svcs column, showing all the services running on the client. And, the server understands this test. I can add entries into hobbit-client.cfg along the lines of HOST=foo SVC "SomeService" startup=automatic status=started COLOR=red and if the service isn't running it will change to a red status. I want the same functionality for Solaris services. I wrote a very simple test for Solaris services (see below), but of course, that's a client-side test, and the services to alert on can't be configured at server side. (It will also only register services in maintenance mode, not disabled services) I thought maybe I could hack the hobbitclient-sunos.sh to send the stuff under the [svcs] heading, like BBWin does, but that didn't work. (I assume there is some logic defining what the server expects from each client type) I even went so far as to massage the output of svcs -aH to look at least similar to the BBWin svcs output. I would like to be able to have a Solaris client, sending service info, and be able to define entries in hobbit-client.cfg similar to this HOST=foo SVC /system/cron STATE=online COLOR=red And have the server bleat if that service isn't online. What would that require to make work? Regards Vernon #!/bin/ksh TEST="svcs" SVCS=/usr/bin/svcs TEMPFILE=$BBTMP/svcs.tmp COLOUR="green" date > $TEMPFILE echo >> $TEMPFILE $SVCS -x > $TEMPFILE.tmp EXIT=$? if [ $EXIT -eq 0 ] then # Command ran OK if [ -s $TEMPFILE.tmp ] then # It's not empty - bad COLOUR=red echo "There are issues with configured services." >> $TEMPFILE echo "Please investigate" >> $TEMPFILE echo >> $TEMPFILE else # It is empty - All is good. echo "All services running OK" >> $TEMPFILE echo >> $TEMPFILE fi else # Error running command COLOUR="yellow" echo "Error running $SVCS -x " >> $TEMPFILE echo "Please investigate" >> $TEMPFILE echo >> $TEMPFILE fi cat $TEMPFILE.tmp >> $TEMPFILE rm $TEMPFILE.tmp $SVCS -a >> $TEMPFILE $BB $BBDISP "status $MACHINE.$TEST $COLOUR `cat $TEMPFILE`" rm $TEMPFILE

3 9

Wildcards in client-local.cfg
by everett.vernon＠gmail.com 03 Aug '10

03 Aug '10

Hi all Anybody had any luck using wildcards in the hostname definition of client-local.cfg? Is it even possible. I have no problem with [dbserv01] log:/var/adm/messages:10240 Other stuff However, I am not having much luck with wildcard entries like [%dbserv..|dbdev..] log:/var/adm/messages:10240 Other stuff This would save me a lot of time and effort, but not managing to make it work. Any tips? Or is it just not going to work? Regards Vernon

2 1

New UPS monitor added to Xymonton
by waa-hobbitml＠revpol.com 02 Aug '10

02 Aug '10

I just added a new entry to the Xymonton monitors page. The set of scripts is to monitor and graph AC input voltage, AC output voltage, battery charge %, battery voltagee, and UPS Load % of UPSes monitored by the Network UPS tools (NUT) suite. NUT is a great open-source UPS monitoring project who's primary goal as stated on their website is: "...to provide reliable monitoring of UPS and PDU hardware and ensure safe shutdowns of the systems which are connected. We attempt to monitor every kind of UPS and PDU, given sufficient interest." NUT may be found at http://www.networkupstools.org/ The latest versions of the xymon_nut_*.sh scripts, as well as instruction on installing them may be found at http://www.revpol.com/xymon_nut_scripts Hope these are useful to someone. :) P.S. I am not affiliated with the NUT project in any way other than that I recommend, install and support it at my client's sites. (A similar message may be cross-posted to the NUT users mailing list) -- Bill Arlofski Reverse Polarity, LLC

5 18

New perl library and client channel script added to xymonton
by david.baldwin＠ausport.gov.au 02 Aug '10

02 Aug '10

I've just spent a bit of time tidying up some code I've been meaning to do for ages and put on xymonton. http://xymonton.trantor.org/doku.php/monitors:check-client http://xymonton.trantor.org/doku.php/monitors:xymonext.pm check-client.pl --------------- Listens on the client channel form hobbitd and produces new columns and status reports - easily extended. At present it reports on the following: "pmem" - can be used to check physical memory size - I set this up to ensure teh service console VM on ESX hosts had sufficient memory allocated "route" - check that a host has the correct default route configured - I had a couple of hosts that "lost' their default route, so wanted to make sure that wouldn't happen again "who" - any root login shows yellow. Lists currently logged in users If additional sections are added on clients in the hobbitclient script, this script can be extended to report on those. XymonExt.pm ----------- Based on the BigBrother.pm script from deadcat.net, with various xymon extensions. Can be used on the xymon server to query bb-hosts for various test tags, and on any client to query xymon server, track test colours and report in various ways. $ perldoc XymonExt.pm XymonExt - Perl extension to simplify writing XymonExt external scripts in PERL. SYNOPSIS use XymonExt; XymonExt->import(); test stuff... XymonExt->Report($HostName,$function,$color,$status); DESCRIPTION Requires: $BBHOME environment variable to be set EXPORT None by default. Methods import() This function imports the Xymon environment referenced using $ENV{BBHOME} InitStatus([$host]) Resets test status to "green" (optionally for $host) UpdateStatus($status[,$host]) Updates test status to $status if more severe than current status (optionally for $host) order is: green clear yellow red GetStatus([$host]) Returns current test status (optionally for $host) Items($forkey) returns space separated list of items that match $forkey HostItems($host,$forkey) returns space separated list of items for $host that match $forkey HostsByTest($test) returns list of hosts for plain $test HostIP($host) returns IP for $host Report($HostName,$test,$color,$status) Reports to BB server that $Hostname.$test has status $colour and with status message $status Client($HostName,$ostype,$configclass,$rep) Reports client report for $Hostname with OS type $ostype (linux,bbwin,etc) and config class $configclass (linux,win32,etc) client report details in $rep QueryColor($HostName,$test) returns current colour of test from hobbit server -- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617 ------------------------------------------------------------------------------------- Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender. -------------------------------------------------------------------------------------

4 4

IP address - from where?
by everett.vernon＠gmail.com 02 Aug '10

02 Aug '10

Hi all Probably need some of the coder types to answer this one for me. For the different network tests, where does Xymon get the IP address from? In particular, ping, ssh, oratns, dns etc. I think I read somewhere that for ping, Xymon does a host name lookup. But is this the case for the other tests? Thanks Vernon

5 10

Xymonton code download question
by david.baldwin＠ausport.gov.au 01 Aug '10

01 Aug '10

Has anyone worked out how to create a link in Xymonton to directly download the code of a test? The monitor page template has a Download field which is why I'm curious. DokuWiki doco suggests it's possible: http://www.dokuwiki.org/syntax#downloadable_code_blocks It doesn't seem to work. The <file> tag isn't supported at all. Old version on xymonton, or my bad? Thanks, David. -- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617 ------------------------------------------------------------------------------------- Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender. -------------------------------------------------------------------------------------

2 1

m0n0wall firewall monitor added to Xymonton
by waa-hobbitml＠revpol.com 30 Jul '10

30 Jul '10

Hello everyone. I just added a m0n0wall firewall monitor to Xymonton. m0n0wall is a popular open-source firewall based on FreeBSD. It has a pretty simple, clean web-based GUI for management and it may be installed to hard drive, booted from CD or USB, and it even runs on several "embedded" systems. m0n0wall may be found here: http://m0n0.ch/wall The xymon_m0n0CFG.rb script polls the main status page from one or more m0n0walls using wget and then pulls out the relevant fields (Version, Platform, Uptime, Last modification change date/time, and Notes) and reports them back to a Xymon server to be displayed. The script is configured to send a yellow alert if the m0n0wall has been up less than 24 hours, or if the configuration has been changed. Instructions on installing this script and the the latest version may be found here: http://www.revpol.com/xymon_m0n0CFG_script Hope this is useful to someone! (a similar email will be cross-posted to the m0n0wall mailing list) -- Bill Arlofski Reverse Polarity, LLC

2 1

xymon-client repo install broken also?
by epperson＠alumni.unc.edu 30 Jul '10

30 Jul '10

After hand-repairing a broken repo install of xymon on a new prototype xymon server, I just attempted a xymon-client install on a prototype client. That was broken, too. Am I doing something wrong, or is the rpm just hosed? This is a fully updated RHEL5 system. Like the server install, the xymon-client install blew up with a rename error and left the already unpacked files in place but with no trace of xymon in the rpm database. I guess I can clean up by pulling a file manifest from the rpm. Here's what happened: [root at utility named.data]# yum install xymon-client.x86_64 Loaded plugins: dellsysidplugin Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package xymon-client.x86_64 0:4.2.3-1.rhel5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: xymon-client x86_64 4.2.3-1.rhel5 Xymon 358 k Transaction Summary ================================================================================ Install 1 Package(s) Upgrade 0 Package(s) Total download size: 358 k Is this ok [y/N]: y Downloading Packages: xymon-client-4.2.3-1.rhel5.x86_64.rpm | 358 kB 00:00 warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 60d204a7 Xymon/gpgkey | 3.6 kB 00:00 Importing GPG key 0x60D204A7 "Buchan Milne <bgmilne at staff.telkomsa.net>" from ht tp://staff.telkomsa.net/packages/bgmilne.asc Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Migrating from hobbit to xymon Copying init script settings Copying existing configuration from /etc/hobbit to /etc/xymon /bin/cp: cannot stat `/etc/hobbit': No such file or directory Replacing hobbit with xymon where relevant in config find: /etc/xymon: No such file or directory Moving data files from /var/lib/hobbit to /var/lib/xymon /bin/mv: cannot stat `/var/lib/hobbit': No such file or directory Moving log files from /var/log/hobbit to /var/log/xymon Migration complete Beware, any files reported below as .rpmsave should probably be restored before starting xymon! xymon user present Adding user xymon to group adm Installing : xymon-client 1/1 Error unpacking rpm package xymon-client-4.2.3-1.rhel5.x86_64 error: unpacking of archive failed on file /usr/lib64/xymon/client/etc: cpio: re name Failed: xymon-client.x86_64 0:4.2.3-1.rhel5 Complete! [root at utility named.data]# ls -l /usr/lib64/xymon/client/etc total 0 lrwxrwxrwx 1 root adm 43 Sep 2 2008 clientlaunch.cfg.rpmsave -> /usr/lib/hobbi t/client/etc/clientlaunch.cfg [root at utility named.data]# rpm -qa|grep xymon

3 3

Problems compiling Xymon 4.2.3 on Solaris 9 SPARC
by novosirj＠umdnj.edu 30 Jul '10

30 Jul '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good afternoon, Attempting to recompile Xymon 4.2.3 and I'm running into the following problem: gmake[1]: Entering directory `/usr/share/src/xymon-4.2.3/bbnet' gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE - -D_FILE_OFFSET_BITS=64 -DSunOS -I. -I/usr/share/src/xymon-4.2.3/include - -I/opt/csw/include -DBBGEN_SSL -DBBGEN_LDAP -DBBGEN_LDAP_USESTARTTLS - -I/opt/csw/include -I/opt/csw/include -c -o bbtest-net.o bbtest-net.c In file included from /usr/include/rpc/rpcsec_gss.h:25, from /usr/include/rpc/rpc.h:40, from bbtest-net.c:23: /opt/csw/include/gssapi/gssapi.h:2:20: stdint.h: No such file or directory gmake[1]: *** [bbtest-net.o] Error 1 gmake[1]: Leaving directory `/usr/share/src/xymon-4.2.3/bbnet' gmake: *** [bbnet-build] Error 2 ...my understanding is that Solaris 9 does not have stdint.h, instead having inttypes.h. I don't recall anymore how I got this to compile the first time as it was some time ago. Does anyone have some advice as to how I might accomplish this most easily? Thanks. - -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkxR3J8ACgkQmb+gadEcsb5HFwCcCnoC405dMVkS4daIjhvK2COj q30AoJcy4AzKKziipfYsvzlyZvd5iu61 =oSn5 -----END PGP SIGNATURE-----

2 3

[hobbit] xynagios for RHEL ?
by bb4＠richter-it.net 29 Jul '10

29 Jul '10

Hi Martin, I just took a quick peek into the file and it is a perl script that says in the description: <xynagios> runs a Nagios check, and reports its output in a way compatible with the Xymon (Hobbit, BB) monitoring system. The Xymon test name is taken from the plugin output if it starts with test_name <OK|WARNING|CRITICAL|ERROR|UNKNOWN>. Otherwise, the basename of the plugin filename is used. A check prefix is removed for brevity. So it seems you can run Nagios tests in XYmon with this script. And since this is a perl script you might only need some additional modules that can be found in the Debian package libsysadm-install-perl and maybe there is a similar package for Red Hat too. HTH Torsten Hi ! Can somebody give me an hint or description, how the pluggin xynagios is to use ? Helper software: * xynagios: adaptor for running Nagios plugins with Xymon I've found it in the debian-packes http://packages.debian.org/de/sid/hobbit-plugins And is there a version for RHEL or is that equal ? Thanks & Cheers martin To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

3 3