- Xymon - Xymon mailman web

bb2.html page
by rosana.ramos＠softtek.com 28 Dec '07

28 Dec '07

Hi All, Question. Some of my test scritps are not showing when they are yellow or red on bb2.html. I supposed it can be solved by bbgen command, like: bbgen --includecolumns=mytest Is that correct or there is another way to add my ext test to bb2.html page? Thank you! Rosana

2 1

bb2.html
by rosanar.morales＠gmail.com 28 Dec '07

28 Dec '07

Hi All!! Some of my test scripts are not showing on bb2.html. I supposed it can be solved by bbgen command like: bbgen --includecolumns=mytest is that is correct or there is another way to add this ext test to bb2.htmlpage? Thank you! Rosana

1 0

Critical Systems view loading problem
by gendalia＠gmail.com 28 Dec '07

28 Dec '07

I'm running Hobbit 4.2.0 with the allinone patch on NetBSD 3.x. I've started making use of the critical systems setup at work, but after encouraging all my co-workers to start using it, I've run into a problem. I'm getting an "Internal Server Error" and the error log shows "Premature end of script headers: hobbit-nkview.sh". My problem seems to be related to a test being yellow right now, and right now being outside of the parameters of when the machine/test combo is critical. If I change the critical time for the event from "|W:0800:1700|" to "||", the critical systems page comes up fine. If I put the time constraints back, the page fails to come up again. It started failing after 1700, although I didn't notice it for about 15 minutes. Is anyone else seeing this problem? -Tracy

3 6

'menu' is undefined
by binbin.yang＠ehealth-china.com 28 Dec '07

28 Dec '07

Greetings: On my newly installed Hobbit server, when I open it from the IE, it shows the following error messages. I checked all the service on server and hosts is up. Where can I define the menu? Or how to fix it?Thanks. Binbin Yang IT Department eHealth China Inc . Desk: 00 86 592 2519589 Cell: 0 13950067769 www.ehealth-china.com

4 3

Hobbit client
by FRamaekers＠ailife.com 27 Dec '07

27 Dec '07

This is my first attempt at installing a hobbit client on a Linux box, and I'm attempting to install it on the same box that the server is running on. I have the client running, but the only items reported are bbgen, bbtest, conn, hobbitd, info and trends. I want information on disk and CPU utilization. Is this possible? Is it possible to combine the client/server information? Right now I'm getting two lnes: subpage Hobbit Hobbit Server 127.0.0.1 Hobbit.domain.com # bbd ssh ftp http://DoyleBrunson.ailife.com/ apache=http://thisserver.domain.com/server-status?auto TRENDS:*,apache:apache|apache1|apache2|apache3 10.2.0.99 Hobbit # Also, I'm getting the following in msg.Hobbit.txt: [msgs:/var/log/messages] Cannot open logfile /var/log/messages : Permission denied [logfile:/var/log/messages] type:100000 (file) mode:600 (-rw-------) linkcount:1 owner:0 (root) group:0 (root) size:219873 clock:1198690147 (2007/12/26-11:29:07) atime:1198688817 (2007/12/26-11:06:57) ctime:1198689945 (2007/12/26-11:25:45) mtime:1198689945 (2007/12/26-11:25:45) Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at PrivacyAct at ailife.com.

3 3

Little change-request for do_temperature.c ...
by rolf.masfelder＠nector.de 27 Dec '07

27 Dec '07

Hallo Henrik, the last Days were a litle bit cold in germany. So i found that rrd/do_temperature.c dont work correctly on negative values ... In the part: p = bol + strlen(bol) - 1; while ((p > bol) && isspace((int)*p)) p--; while ((p > bol) && isdigit((int)*p)) p--; tmpF = atoi(p); while ((p > bol) && isspace((int)*p)) p--; while ((p > bol) && isdigit((int)*p)) p--; tmpC = atoi(p); there have be two additional lines of code: p = bol + strlen(bol) - 1; while ((p > bol) && isspace((int)*p)) p--; while ((p > bol) && isdigit((int)*p)) p--; --> while ((p > bol) && *p == '-') p--; tmpF = atoi(p); while ((p > bol) && isspace((int)*p)) p--; while ((p > bol) && isdigit((int)*p)) p--; --> while ((p > bol) && *p == '-') p--; tmpC = atoi(p); The rrd-File has to bee build with another Minimum for the Values stored. I dont find the code for the creation, but "rrdtool tune temperature.sensor4.rrd -i temperature:-10" did the job for my environment. please insert the lines of code into do_temperature.c greetings to All: (after christmas) I wish you a happy new year Rolf

1 0

4.3 4release
by kevinmhanrahan＠hotmail.com 27 Dec '07

27 Dec '07

Can somebody please tell me where I can get the 4.3 release? thank you

3 3

HIGH 'PING test results sent' number in bbtest
by mprice＠sgt-inc.com 26 Dec '07

26 Dec '07

Hello, Has anyone seen the 'PING test results sent' duration number go up to 30 seconds??? This number is found in the bb-test column. Any help would greatly be appreciated... Thanks, michael

1 0

Message origin
by FRamaekers＠ailife.com 26 Dec '07

26 Dec '07

I can't determine where this (/var/log/hobbit/hobbitlaunch.log) coming from: 2007-12-26 09:53:19 Cannot open env file /home/hobbit/server/etc/hobbitserver.cfg - No such file or directory (This represents the my old directory structure.) TIA, Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at PrivacyAct at ailife.com.

2 1

Strange CPU warnings with the netapp.pl script
by hw＠proact.dk 24 Dec '07

24 Dec '07

Hi there! I'm using the latest version of hobbit together with the netapp.pl script to monitor a few NetApp boxes... Everything works as expected, unless for two of the three NetApp boxes which keeps complaining about CPU warning issues: CPU Usage= 0% &yellow Cannot get any CPU data That's the warning I keep getting.. that is it comes with about 15 mins. Intervals, so some times it gets the CPU data from the NetApp, and ever so often it doesn't... The "funny" thing is that one of the two NetApp boxes on which this is an issue, is actually in a cluster with another box which doesn't have the issue at all.. All the boxes are running the same ontap version 7.2.3. I'm polling the boxes every 5 mins. And I have tried to enable the multithread option in the netapp.pl script... I realize that this may not be a bug in the script but maybe somewhere else... but how can I ignore this warning in the netapp.ini file ? Or in the hobbit-alert.cfg ? Currently I alert on everything (*) are you able to exclude the cpu alerts without listing all the alerts ? Home someone can help me out here ? /Heino

1 0